Short description
Thermostatic head with liquid sensor for thermostatic valves for radiators. Temperature locking and limiting to a desired value with a forked pin system (see instructions below). Hysteresis 0,19°C; Room temperature setting range T = 7-28°C.
Instruction Sheet
Keymark
PRODUCT CERTIFICATIONS
Applications
This product is relevant to plumbing and heating applications. Final selection should be checked against the project requirements and available technical data.
What to check
- Confirm that the model and product code match the required application.
- Check connections, components, outlets and installation requirements from the ICMA technical datasheet.
- Do not rely on a general description where precise product selection is required.
Technical characteristics
Technical characteristics are shown in the table below.
CTA
Contact us for availability, technical details and correct product selection.
Technical table
| Specification 1 | Specification 2 | Specification 3 |
|---|---|---|
| Minim. adjustment calibration (anti-freeze position): | ts min | 7°C (❄) |
| Max. adjustment calibration (position): | ts max | 28°C (5) |
| Saving condition (position): | 20°C (3) | |
| Maximum working pressure: | PN | 1000 KPa |
| Maximum differential pressure: | Δp | 100 KPa |
| Nominal capacity “qm N” angle-straight: | qm N | 190 Kg/h |
| Maximum working temperature: | 110°C | |
| Maximum storage temperature: | 50°C | |
| Hysteresis: | C | 0.19 K |
| Authority: | a | 0,9 |
| Response time: | Z | 20 min |
| Differential pressure influence: | D | 0,25 K |
| Water temperature influence: | W | 0,7 K |
| Use of the protection cap: | 55°≈1K | |
| Connection to thermostatic expansion valves: | M28x1,5 M30x1,5 |
Technical documents (4)
For an accurate quote, send us
- Where the product will be used
- Quantity or dimensions where available
- Photos, drawings or material list if available
- Whether you need store collection or delivery
- Pipe or fitting diameter
- Material type
- Quantity